Nordic Controls

Control parts for the panels and machines you look after.

Nordic Controls is an independent UK supplier. We visit maintenance teams and panel builders, see what you run, and quote the parts you need within one working day.

Or call us on 07466 308996, Monday to Friday.

See how a line works
Drawing of a small automated line and its control panelA control cabinet with a power supply, a PLC with input and output cards, a network switch, circuit breakers, a safety relay, interface relays, contactors, a timer, terminal blocks and two drives. Below it an operator panel, a conveyor driven by a geared motor, a photoelectric sensor, a proximity sensor, a safety light curtain and a stack light.24 V DC5 ARUNERRC10C10C10C1050.0Hz50.0RUNNING50.0 Hz · COUNT 1POWER

How a line works, and what we supply for it

Power

Power comes first.

The 24 V supply powers the PLC, the sensors and the relays. We supply DIN-rail power supplies, from small single-phase units to three-phase supplies with buffer and redundancy modules.

Input

Sensors see what's happening.

A photo eye spots the tote arriving and sends a signal to the PLC's input card. We supply inductive, capacitive and photoelectric sensors, encoders and transmitters.

Logic

The PLC decides what to do.

The operator presses start, the PLC reads its inputs and runs the program. We supply PLCs, I/O cards, operator panels and network switches, including spares for older systems.

Output

Outputs switch the power.

The output card drives an interface relay, which switches the contactor and tells the drive to run. We supply relays, timers, contactors, overloads, MCBs and terminals.

Control

The drive runs the motor.

The inverter ramps the conveyor motor up to speed and holds it there while the line counts each tote. We supply inverters, soft starters and motor protection, matched to the nameplate.

Safety

Safety stops it at once.

A hand breaks the light curtain, the safety relay cuts the drive and the stack light turns red. Nothing restarts until the area is clear and the operator resets it. We supply light curtains, safety relays and interlocks.

If it's in your plant, ask us.

Including parts that are no longer made. Send the part number or a photo of the label and we'll find it, or the closest current replacement.

Everything we supply

We come to you

We would rather meet you than send a catalogue. Visits are free, by appointment, and usually take about an hour. We cover Yorkshire, the North West, the North East, the Midlands and the East of England, and elsewhere in the UK by arrangement.

Arrange a visit
  • We walk your site with youand look at the machines and control panels you depend on.
  • We note the parts that mattersuch as spares for critical machines and parts that are no longer made.
  • We take your enquiries there and thenand send one clear quote within one working day.
  • We follow upand keep a record, so next time you only need to call.

When a machine stops, send us the part number.

Tell us how urgent it is. We'll come back quickly with what's available, how soon it can reach you and what it costs, so you can decide.

How we can help
  • Breakdown sparesWe look for the fastest realistic option first and tell you what speed costs.
  • Discontinued partsWe search manufacturers, distributors and surplus stock.
  • ReplacementsWhen the original has gone, we show the replacement side by side so your engineer can approve it.
  • Cost-effective equivalentsWhere a standard part from another manufacturer genuinely does the same job, we say so, list the differences, and send one free to prove it. Non-safety parts only.
  • Panel buildsSend a bill of materials and we quote and deliver it as one order.

Free of charge

Paying brand prices for a standard job?

Send us the ten parts you replace most often. We'll tell you which ones have a proven lower-cost equivalent, which ones don't, and roughly what you'd save over a year. Then we'll send the first one free so you can prove it on the machine.

No fee, no obligation to buy. Non-safety parts only; safety parts are always replaced like for like. If the right answer is "keep the part you have", that's what we'll tell you.

  1. You send the listPart numbers, roughly how many a year, and where they're fitted. A photo of the stores shelf works too.
  2. We check each oneAgainst equivalents we've already proven and the manufacturers' data. Differences written down, not glossed over.
  3. One sample, freeFit it. If it does the job, keep it and order the balance. If it doesn't, send it back and we've both learned something.

What a breakdown enquiry looks like

An example, with the clock running. Times depend on the part and on who has it in stock, but the shape is always the same.

  1. 09:10
    You send a photo of the label

    From your phone, by email or the form. You tell us the line is down and where the part is fitted.

  2. 09:40
    We confirm the part

    The exact number, or the current replacement if the original is discontinued, and we check who has stock today.

  3. 11:00
    One quote

    The fastest realistic option with its delivery time, and a cheaper slower one if there is one. Condition stated. Datasheet attached.

  4. 11:20
    You confirm

    By email or purchase order. No account to open, no minimum order.

  5. 11:30
    Ordered and tracked

    You get the tracking when it ships. Next-day where the distributor's stock and the courier allow; we tell you honestly when it won't be.

Engineering notes

Written for the engineer with the old part in one hand

Short, practical notes on what must match when you replace something, and what the words on our quotes mean.

Have a list of part numbers?

Email it, send a photo of the label, or give us a call. We reply within one working day.